配置telnet登陆及特权模式密码
分类:网络技术日期:2010-11-24 - 21:57:56评论:0条作者:老谢
实验目的:配置pc telnet登陆交换机及特权模式的密码
配置过程如下
Switch>en Switch#conf terminal Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int vlan 1 Switch(config-if)#ip add 192.168.1.1 255.255.255.0 Switch(config-if)#no shutdown %LINK-5-CHANGED: Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up Switch(config-if)#exit Switch(config)#enable password 123456 Switch(config)#line vty 0 4 Switch(config-line)#password xj123 Switch(config-line)#login Switch(config-line)#end |
最新评论
zwwooooo:买特斯拉和买iPhone的人群其实相似...
平安家属子痕:一直坚持油车,看你写的心里有...
秦大叔:室内每年能开2万公里电车确实划算 ...
灰常记忆:尊贵的特斯拉车主啊,对了一直对单...
拳废神域界:我的车现在平常跑不了啥,就放假...
大峰:电车起步超级快,我油车反正是跟不上,...
Mr.Chou:电车高速上真120和油车120真的有区...
Mr.Chou:18 19年入手的房子现在死的心都有了...
老何:不至于跌得这么狠吧
Andy烧麦:这些大厂都能提供必要的售后